1. Log into CSBERP via NinjaOne
2. Install printer normally, just like any other printer.
3. Once printer is installed, go to control panel > View Devices and Printers
4. Locate the printer you just installed.
5. Right click the printer and select "Printer Properties":
6. Click the "Advanced" tab.
7. Click "Printing Defaults" in the bottom left:
8. Select "Page Setup"
9. For Orientation select "Portrait 180"
10. Click the "Stock tab"
11. Turn the Darkness setting to 100:
12. Click "Apply" and then click "Ok"